Lectrosonics publicizes the SRDB25AES Digital Output Adapter for Lectrosonics SR Sequence Receivers

The SRDB25AES digital output adapter mounts onto any Lectrosonics Digital Hybrid Wi-fi SR Sequence 2-channel slot receiver and converts the analog audio outputs from the receiver to AES digital at 48 kHz. This adapter is useful when pairing an older unit like an SRC in a slot dock with a brand new receiver like a DSR4, permitting all channels from each receivers to enter by the slot in digital format. Word that for mounting in a Sound Gadgets SL-2 dock, the 8-Sequence firmware have to be v9.50 or greater for this adapter to work correctly.

SRB and older SR receivers can be utilized with this adapter for audio and energy whereas no knowledge connection is current, so all receiver settings must be made by way of the receiver entrance panels. The SRC has a knowledge connection, and all earlier features are retained when it comes to receiver management by the slot interface. SRB receivers with the FM01 replace (an up to date audio board) even have this knowledge connection.

This adapter is taller than most different SR-Sequence backside plates, including a bit over ½ inch to the receiver case size. When put in on a unit, the ensuing peak is similar to a DSR4 mounted with a DSR4DB25 backside plate. In different phrases, when a DSR4 is slotted subsequent to an SRC with one in all these adapters, each receivers would be the similar peak whereas within the dock. Any slot-mounting {hardware}, like bezel adapters used for the DSR4, can be utilized with an SR receiver and the SRDB25AES backside plate.

The brand new SRDB25AES adapter provides an vital utility for these with legacy Lectrosonics slot receivers. The power to mount older and newer receivers collectively in numerous docks, all with digital audio connections, provides choices for these with numerous {hardware} platforms.

Pricing

The SRDB25 AES is obtainable now for $379.