The best way to Flash ExpressLRS Receivers through UART utilizing FTDI Dongle (Radiomaster UART Flasher)
Ever discovered your self with a bricked ExpressLRS receiver after a foul firmware replace? Or are you unable to flash your RX utilizing FC Passthrough nor WiFi? That is the place an FTDI dongle comes into play. On this information, I’ll stroll you thru the method of flashing ExpressLRS receivers through UART utilizing an FTDI programmer, such because the Radiomaster USB UART Flasher.
Why Use FTDI for Firmware Updates?
Whereas the simplest strategies to replace firmware are through Betaflight Passthrough or Wi-Fi (which I’ve coated in a earlier tutorial), there are situations the place these strategies would possibly fail, comparable to a lack of connection. These points can lead to bricked receivers, the place the bootloader turns into corrupted.
An FTDI programmer, which permits flashing through UART, can come to the rescue. This technique will also be helpful for those who’re not utilizing a flight controller or don’t have entry to Wi-Fi. It’s a flexible answer that works with all manufacturers of ELRS receivers, for each 2.4GHz and 900MHz, with out the necessity for specialised software program.
{Hardware} Requirement
For this activity, you’ll want a USB to serial programming software, generally often known as an FTDI Programmer. Many producers provide devoted instruments for this goal, such because the Radiomaster USB UART Flasher, accessible right here:
Whereas BetaFPV additionally provides an analogous software, the ExpressLRS Restoration Dongle (https://oscarliang.com/product-9zim), I’ll be utilizing the Radiomaster mannequin on this demonstration. The steps, nevertheless, are related for each.
A generic FTDI programmer is a less expensive choice (https://oscarliang.com/fpv-tools/#FTDI-Adapter), although it lacks the comfort of spring-loaded pins and different devoted harness that facilitate solder-free connections.
The FTDI programmer is easy to make use of. You’ll be utilizing 4 pins: RX, TX, VCC, and GND. VCC is 5V, GND is floor, and RX/TX are the information connection.
Step 1 – Plug in FTDI Dongle
Begin by opening the ExpressLRS Configurator and noting the accessible COM Port (COM port quantity will be totally different in your laptop).
After connecting the FTDI dongle to your laptop, choose the newly appeared COM port. If no new COM port seems, it’s possible you’ll want to put in the cp2102usb driver.
Step 2 – Join Receiver to FTDI Dongle
To replace through FTDI, the receiver should be in boot mode.
This usually entails holding down the boot button on the receiver whereas connecting it to the FTDI Dongle (you may launch the button as soon as the LED activates). Some receivers might require bridging two solder pads as an alternative of urgent a button (you may take away the solder bridge after flashing).
Join the receiver to the FTDI Dongle utilizing the spring-loaded pins (whereas holding down the boot button). Right here’s the connection order to observe:
- VCC – 5V
- GND – GND
- TX – RX
- RX – TX
Ought to I take advantage of 5V or 3.3V? For many ExpressLRS receivers, the 5V setting is acceptable.
The Radiomaster UART Flasher additionally features a cable harness for receivers with out solder pads.
As soon as related, the receiver ought to energy up with a stable LED, indicating it’s in boot mode and able to be flashed.
Step 3 – ExpressLRS Configurator
Proceed with the usual setup within the ExpressLRS Configurator. Select your firmware model, machine class, and particular mannequin. Make sure the flash technique is ready to UART.
Configure the remaining in accordance with your preferences, and ensure the COM port of your FTDI programmer.
Step 4 – Begin the Replace
Click on on ‘Construct & Flash’ to provoke the replace. As soon as the method completes efficiently, you may disconnect the receiver from the FTDI dongle.
Conclusion
Realizing replace ExpressLRS receivers through FTDI is very helpful, notably when different approaches fail. This tutorial goals to offer a transparent, step-by-step information to effectively recuperate and improve your ELRS RX utilizing an FTDI programmer, such because the Radiomaster USB UART Flasher. This course of would possibly save your bricked RX from being discarded. Keep in mind, all the time double-check your connections and settings to make sure a profitable replace.
Supply hyperlink
