The SmartSystem SM7-PRO-3G monitor was designed particularly to be tremendous sturdy, fanless, stabilizer optimized and have 3200nits of brightness.
The SM7-PRO-3G additionally incorporates a new internally developed communication protocol referred to as XTBus that may help you join new merchandise in a devoted community the place they’ll share data and knowledge.
The monitor additionally has Adaptive Brightness management and is water-proof. As a result of it’s fully fanless and in aluminum, the temperature modifications shrink and enlarge the outer shell making it capable of handle the sudden water like rain on devoted water paths granting to proceed taking pictures with out worrying an excessive amount of.
Key options
- 7″ 3G-SDI Hyper Vivid monitor with as much as 3200 nits.
- IPS display with safety glass and particular anti-reflective coating.
- Adaptive Backlight Administration to at all times supply the perfect brightness based mostly on outer atmosphere.
- Particularly engineered to go well with all of the bodily necessities by trendy stabilizers.
- Completely balanced on its CG fixture (lateral mount / central gap).
- Particular design capable of tackle rain and water on devoted paths.
- XTPort for quick knowledge communication with different peripherals.
The monitor is supplied with a 7″ Extremely Hyper Vivid LCD panel with a local decision of 1920 x 1080 and a distinction ratio of 1200:1. There are default Log to Rec 709 conversion LUTS resembling Log-C, C-Log, S-Log2, S-Log3, V-Log, RedLogFilm, and so forth. You may also load up your individual LUTs through a USB thumb drive.
Having Adaptive Brightness management is a pleasant characteristic for a monitor that’s going for use along with stabilizers as there’ll at all times be occasions the place you’re going out and in of various lighting circumstances. The Adaptive Brightness management could be turned on or off and it may be assigned to any one of many 8 assignable buttons on the entrance of the monitor.
The SM7-PRO-3G incorporates a good array of inputs and outputs:
- 1x 3G-SDI Enter (SMPTE 425A / SMPTE 425B)
- 1x 3G-SDI Output (SMPTE 425A / SMPTE 425B)
- 1x XTPort for XTBus communication
- 1x Tally port
- 1x 2-pin 9V to 34V energy enter
- 1x 2-pin energy out
- 1x 4-pin connector for XTPort for energy and knowledge inputs.
Sure, the monitor doesn’t have 6G or 12G SDI inputs or outputs, however as a result of it’s primarily being aimed as a monitoring answer for top finish stabilizers I don’t assume that issues.
For energy there may be additionally an optionally available V-lock or ABGold Mount battery plate obtainable.
The monitor has an influence consumption of 25W and it weighs 1.3kg / 2.7 lbs. It has a working temperature of -20C to 40C.
Worth & Availability
The SmartSystem SM7-PRO-3G monitor is now obtainable for $2,739.95 USD.
